行业新闻

当前位置:首页/新闻中心/行业新闻

电化铝,Eletrolytic Aluminium Sheet英语短句,例句大全

2024年02月23日一般工业技术学术英语浏览量:0

电化铝,Eletrolytic Aluminium Sheet

1)Eletrolytic Aluminium Sheet电化铝

英文短句/例句

1.Hot Stamping FoilGB/T10456-1989电化铝烫印箔

2.Marketing Evolution Of Bauxite,Alumina And Electrolytic Aluminum;铝土矿、氧化铝和电解铝产业链市场及利润流向

3.An Optimum Pattern For Development Of Aluminum Industry In Chinese Mainland--The Optimum Integration Of Coal,Electric Power,Aluminum,And Aluminum Semis Idustries;煤—电—铝—铝材一体化:中国发展铝工业最佳模式

4.Electroplating Al Coating In Molten Salt And High Temperature Oxidation Process;熔融盐电镀铝及镀铝层高温氧化的研究

5.Application And Practice Of Domestic Alumina In Aluminum Eletrolysis Production国产氧化铝在铝电解生产中的应用实践

6.Research On The Reduction Of Aluminium Fluoride Consumption In Aluminium-Smelting Process降低氟化铝在铝电解生产过程中消耗的探讨

7.High Temperature Antioxidation Mechanism Of Arc-Sprayed Fe-Cr-Al/Al Composite Coatings电弧喷涂铁铬铝/铝复合涂层的高温抗氧化机理

8.Melt Purification In The Course Of Producing Aluminum Alloy Slab By Using Electrolytic Aluminum Melt用电解铝液生产铝合金扁铸锭的熔体净化工艺

9.Advantage Analysis Of Anhydrous Aluminium Fluoride Application In Primary Aluminium Smelting Production无水氟化铝对电解铝生产的有利因素分析

10.The Study Of The Enlarge Of Current In 160KA Cell;160KA预焙铝电解槽强化电流试验研究

11.Optimize Study On Electrical Conductivity Of Low -Temperature Containing Potassium Melting Baths For Aluminium Electrolysis含钾低温铝电解质导电性能优化研究

12.Discussion On The Technology Of Increasing The Current Of Large Prebaked Cell大型预焙铝电解槽强化电流技术探讨

13.Study Of Electrochemical Impedance Spectroscopy On Anodized Aluminum Alloys;铝阳极氧化膜的电化学阻抗特征研究

14.ELECTROCHEMICAL CHARACTERISTICS OF PHOSPHATING ACCELERATED BY RARE EARTH NITRATE ON ALUMINUM ALLOY铝合金稀土硝酸盐磷化的电化学行为

15.An Electic Current Is Applied To The Cell, Converting The Aluminium Surface Into A Coating Of Aluminium Oxide.电解池通过电流,铝片的表面就逐渐积聚起氧化铝层。

16.Study And Application On Current Intensifying And Simulation Of Thermal-Electric Field In Prebaked Anode Aluminum Reduction Cells;铝电解槽电流强化与电热场仿真研究及应用

17.The Competition Mechanism Of Passivation-Activation Of Surface And Tunnel Walls In The D.C. Etching Of Aluminum Foils For Electrolytic Capacitors;电子铝箔直流电侵蚀过程的钝化—活化竞争机制

18.Code For Ventilation And Fume Purification Design Of Aluminium Smelters铝电解厂通风与烟气净化设计规范

相关短句/例句

Aluminizer电化铝箔

3)Hot-Pressure Printing电化铝烫印

4)An Integrated Enterprise Composed Of Electric Power And Electrolgtic Aluminum Divisions铝电一体化

5)Fused Alumina电熔氧化铝

6)Alumina Arc Tube氧化铝电弧管

延伸阅读

铝电化学搓纹分子式:CAS号:性质:光敏印刷版制作中的必要工序。通过电化学法,在平整的铝材表面形成具有均匀孔蚀排列和一定深度和间距的毛面,用于控制印刷过程中亲水负图像的表面积。电化学搓纹使用交流电,当电流密度为20~100mA·cm-2时,在体积百分数为0.5%~3%HCl溶液中,刻蚀5~20min。为了提高搓纹的速率和均匀性,目前有的已采用HCl-H3PO4,HNO3,CH3COOH和H3BO4等电解液,同时使用搅拌及多种波形的电源。